CNC, Grinders and Tooling Machines

Fire Systems for the Cutting Tool Making Industry

Pyrogen have the original CnC machine automatic fire suppression systems. Remember when all that was available was CO2, and you put out the fire but the thermal shock made machine look like a pretzel. It took a week to get a service company to refill it. Then came the CFC and HFC agents that made so much Acid, you needed a new machine anyway, but the insurance company said it looked fine to them,. Well we developed the perfect solution, Pyrogen CnC fire suppression Systems..

We use proven spot heat detectors and linear heat detection wire to insure we find the fire fast and put it out. Our electronic controllers interface with the machine to provide E-stop, cutter back out vent and mist collector shutdown also with agent discharge and operator notification. Designed to unattended operators, the system is selectable for fire detection only, operator manual operation to fully automatic release. We can also zone in the electric motor, power switches and controls and pump enclosures in the same system.

We offer a range of fire systems controls one will be perfect for your needs. From simple detection systems for the grinding area to mist collector, chip trays, exhaust ducts, and pallet changing robots. If it is electric, hydraulic or might burn, we have a solution.

All new Automatic and Manual fire suppression systems for CNC and other metal working machines. No pressure bottles to leak, no thermal shock, no waiting for replacement bottles or technicians to put your machine back in service. Installation and maintenance services available.

Typical CNC Installation

Pyrogen CnC systems can be tailored for your machines. We offer four different control systems, from fully automatic agent discharge and shutdown to manual discharge with automatic detection. We offer spot heat detection and linear heat detection wire systems to fit your individual needs. We have retrofit kits for almost every grinding and turning application. Installed in four to six hours to reduce machine down time. Simple design often allows external installation and wiring to be done while the machine is still in production. We specilize in CnC Grinding and EDM machines for the tool making Industry.

Our OEM systems provides CnC machine manufacturers and distributors turn key kits. These are installed prior to delivery and provide complete protection for new equipment. We offer complete detection systems for coolant, mist and chip extractors, as well as the machine cabinet and tool storage. Safety interlocks allow the system to alarm even with the door open or while loading or changing tooling, with manual discharge by the operator. We also offer a discharge time delay after alarm from 5 - 30 seconds if desired. We use real fire detection systems equipment, not a plastic tube.

Pyrogen Aerosol is non toxic, it has no post combustion by-products like the HFC agents, and no thermal shock caused by CO2 flooding systems. Pyrogen chemically inhibits combustion and does not decompose when exposed to a flame too high heat. Hydrofluoric acid formed by other cheaper systems can do more damage than the fire itself. The corrosive properties of UHF are well known, and often do more damage than just the tolerances changes and warping of cold shock caused by CO2.

Systems available for micro grinders 0.2 cubic meters to large ganged machines up to 75 cubic meters. Hundreds of systems in service now, why are you waiting?

Complete systems and installation kits available for a micro grinder kit to systems for a advanced integrated palletized systems. How can you afford not to “Protect your Equipment.”?

Controller Types

FO&GI USA OEM style panel type "A"

PCNC-x-A

Installation Drawing

Miniture Sp-1 Controller type "C"

PCNC-x-C

Installation Drawing

ISO / EU style OEM control panel "B"

PCNC-x-B

Installation Drawing

New Intelligent mutli zone controller type "D"

PCNC-x-D

Installation Drawing

Manual

• Micro Sense II Manual

Part Numbers and Available Manufacturer Retrofit

Part numbers below are less controller. ADD a dash and letter code for the option you desire ie:

PCNC-1-A = 60g Kit with Pyrogen controller PCNC-1-B same 60g kit but with MicroSense II controller.

Systems are available for the following manufacturers