Stillbrooks Laboratory is located about 45 minutes  north of the Boeing Everett facility. Centrally located between Seattle's SeaTac airport (SEA), and the International Airport at Vancouver BC. (YVR) 1 hour or Abbottsford BC (YXX) 45 minutes.

 
Driving Directions From: To:  StillBrooks Laboratory
Seatac Airport   (SEA)  see map below
Seattle, WA 
I-5  North to

Exit 230  West Lab
Exit 232  East Lab
NEW Laboratory  (east lab)
640 W Hwy 20
Serdo-Woolley, WA 98284
Ph 360 856 1500

AEROSPACE  Center  (west lab)
11817 Westar Lane
Burlington, WA 98233
 Ph  360 722 7782     Fax 360 722 7783



Google local Reference maping system

From Vancouver BC (YVR) see map below
Take CN99 south to
US border continue south on I-5 to
Exit 232 Cook road to east lab
Exit 230 Hwy 20 west lab

From Abbotsford BC (YXX) see map below
right out of the airport, go west*
Left at the dead end, straight after
US Customs south on 539 to I-5 then
south to
Exit 232  Cook road to (east lab)
Exit 230  Hwy 20 to west lab


* if you go east, cross the border on Hwy 9
at Sumas, then 546  to 539 to I-5

 The new east lab complex is located on the N. Cascades Highway, State Hwy 20 (WA20) in Sedro-Wolley at the intersection of Cook Road and Hwy 20. If coming in on I-5 you can get off at EXIT 232 and go east 5 miles to the traffic light at HWY 20. Turn right, our campus is on the right about 50 yards   (just past the Burger King). The offices are on the HWY 20 side of the campus. The fire lab and test buildings are on the Cook Road side, within the secure fenced area.  Parking for the lab is marked RedBrooks Visitors

Wildland Fire Research Center
Urban inteface lab
Watermist test lab
Aerosol flooding agent development
Recreational Marine and IMO test facility
Chemicals and coatings
Unmanned Air Vehicles (UAV) and Unmanned Ground Vehicles (UGV) test

Link to google map Sedro Woolley

 
The location marker on the above map link is off about a mile to the northeast, we are at the near Cook Rd and N.Cascades Highway  (SR20) intersection.

The west lab complex is at the original location at the international Aero Interiors plant. This is the Aerospace center. Located at the Skagit regional airport,  exit 230 west to Peterson road. 2 miles to Westar Lane.  as below.

Aerospace and Airliner Cabin Safety Center
Comerical aircraft fire research
FAA fire test methods
Cargo compartment test article
V-22 Osprey test articles
Hidden area and sub floor fire test facility
ArcFault, electrical and wiring test lab

Link to Burlngton and Skagit airport

The location marker on the above map link is off about a1/4 mile  to the west,           
 
This page will print for you convenience              


                                    
                                               

Directions                                                                                 Distance   miles       (Total miles)
 Distance: ~ 70.0 miles; Duration: 74 minutes

          1  Exit parking and follow the signs to I-5 North  Left exit to freeway       0.8    (0.8)
          2  Continue on ramp at sign reading 'I-5' heading North                              0.6    (1.4)
          3  Continue on I-5 heading North                                                                     62.6  (64.0)
          4  Pass through Everett, Marysville, Mt Vernon  to Exit 230

          5  Continue off ramp at sign reading 'Exit 230 Wa - Hwy 20 to Burlington/Anacortes heading North      Cascade Mall on the right just prior to Exit 230"

          7  Turn left on Wa Hwy-20 heading Southwest ,100 Yds to next Traffic light    64.5   (64.5)
"Left at the traffic light, at the bottom of exit, go into the right lane"                     0.5    (65.0)
          8  Turn right on Peterson Rd ( across R/R tracks, heading North                           0.01  (65.1)
Around the bend through the "fields, the stop sign, housing development, pastures"
to the Port of Shagit

               Follow Peterson Rd. to the Port of Skagit Co.                                                     2.0   (67.1)
          9  Turn right on Westar Lane heading North,                                                             0.25   (67.25  Total  distance)
First right turn in the port,   Last Building on the right,  Look for the Flag pole





From Vancouver (YVR) just take CN-99/ I-5
south to exit 232
Green YELLOW  route
From Abbotsford (YXX) right out of the airport lot, 10 miles to the dead end.
 then left to US Customs then straight to I-5 south to Exit 232
Black YELLOW  route
From Canada
About
History
Products
Laboratory
Testing
Contacts
Home
Click the back button to return to the previous screen

US EPA, SNAP, ISO, ICAO, FAA US DOT, NFPA, SAE, FM, NIST, ATA, UL, SSL, AS/NZS, ODP , GWP , Pyrogen , PYROGEN , Airline Cargo conversions , Class A fire , Class B fire , Class C fire , EMAA, Encapsulated Micron Aerosol Agent, FAR 25. Aircraft Cargo Fires, Telecommunications fires , Transportation fires , Petrol chemical fires , Fire detection, Automobile Fire , Truck fires , Train fires , Building fires , Structural fires , petroleum fires , engine fires , marine fires , cargo fires , wood fires , Halon flooding , UL 1058, aircraft fire protection , aircraft crash , airline cargo fire , airline fire protection , FAA Technical center , Oil rig fires , gas rig fires , vehicle fires , electrical fire suppression , computer room fires , ship fires , machinery fires , merchant vessel fires , train fires , generator fires , battery fires , Wheel fires , brake fires , tire fires , car fires , home fires , Loss productivity , boeing fire test , 737 fire test ,  NRL , Naval Research Laboratory , Naval air systems command , NASC , NAVAIR , AS/NZS 4487:1997 ,  Joint strike fighter , JSF, HARC , NTSB , Transport canada , NIST , FAA Technical Center , Thermal Acoustic Insulation Blankets , IMO , International Maritime commission , USCG , United states coast guard , MCA , Pyrogen Ltd. Pyrogen Corp. Sdn. Bhd. , IAFC , IFPA ,